
The sloped-roof sibling to the current X5 M, running the exact same second-generation S63 in Competition spec, and carrying the same 1200+ bhp ceiling, the highest figure in this entire family shared by only one other car. Whichever of the two you're bringing in, the build underneath is identical.

| Stage | Target | Price |
|---|---|---|
| Stage 1 | 680 bhp · 850 Nm | £550 · £650 dyno |
| Stage 2 | 750 bhp · 900 Nm | £600 · £750 dyno |
| Stage 3, Hybrid Turbo | 1000+ bhp depending on spec | £1,400 dyno only |
| Stage 3, Hybrid Turbo + Ethanol | Power and torque confirmed on our dyno for your car | £1,900 dyno only |
| Stage 3, Big Turbo Kit | 1000+ bhp depending on spec | POA |
On sale since 2019, the F96 X6 M shares its 617 bhp / 750 Nm second-generation S63, its ZF 8HP automatic and its xDrive all-wheel-drive system entirely with the F95 X5 M, the only difference being a lower, more sloped rear roofline in place of the X5 M's more upright, practical shape. Competition trim comes as standard in the UK on both cars. It's the more style-focused half of BMW's current large-SUV M-division pairing, sacrificing some rear headroom and outright boot space for a silhouette that looks faster standing still.
Because the F96 X6 M shares its 617 bhp and 750 Nm factory figures exactly with the F95 X5 M, the tuning path and the ceiling are identical too: Stage 1 is a remap only, no hardware needed, and takes the car to 680 bhp and 850 Nm for £550 (£650 dyno tuned). Stage 2 fits downpipes and intakes for £600 (£750 dyno tuned) on top of parts, unlocking 750 bhp and 900 Nm once exhaust and induction flow stop limiting the engine, and the sloped roofline makes no difference to how that extra airflow is used. From there, the X6 M shares the highest ceiling in this whole family with its X5 M sibling: a hybrid turbo build or a full big turbo kit with matching fuelling pushes the car past 1200 bhp depending on the exact spec chosen. Every stage is built and logged on Samuel's in-house 4WD dyno, and Stage 1 and Stage 2 maps are fully reversible to the factory file at any point.
Stage 1 on the X6 M is a pure software remap, no parts required, taking the car from 617 bhp and 750 Nm to 680 bhp and 850 Nm, identical to the gain seen on the F95 X5 M this car shares its drivetrain with. £650, built and logged on the dyno, fully reversible.
Downpipes and intakes are the Stage 2 parts list, taking the X6 M to 750 bhp and 900 Nm for £600 (£750 dyno tuned) on top of hardware. As on the X5 M sharing this engine, freeing up exhaust and intake flow lets the second-generation S63 pull cleanly at higher revs regardless of the different roofline sitting above it.
A hybrid turbo build keeps the factory housings but fits upgraded internals, and combined with the downpipes and intakes from earlier stages it pushes the X6 M past 1200 bhp depending on the exact spec, matching the highest ceiling in the family. £1,400 on top of hardware.
The big turbo kit pairs full-frame aftermarket turbos with the fuelling upgrades they need, on top of the downpipes and intakes already fitted, also reaching past 1200 bhp depending on spec. POA, because a build at this level is worked out around the individual car and the owner's target figure before anything is ordered.
BMW's S63 is the twin-turbocharged 4.4-litre V8 that's powered every M5, M6, M8, X5 M and X6 M since 2011. Two distinct versions of it turn up across this family. The first-generation S63, fitted to the F10 M5 and F06/F12/F13 M6 at 552 bhp and to the F15 X5 M and F16 X6 M at 567 bhp, ran from 2011 through to around 2018-2019 depending on model. The second-generation S63, sometimes referred to by its internal S63TÜ designation, arrived from 2018 onward in the F90 M5, F91/F92/F93 M8, F95 X5 M and F96 X6 M, with a stronger factory calibration lifting stock output to 617 bhp across the board. Both generations use the same fundamental twin-scroll, twin-turbo V8 architecture, and both respond to Samuel's calibration the same way: Stage 1 is a pure remap using the stock turbos and fuelling system, Stage 2 adds downpipes and intakes to remove the next flow restriction, and Stage 3, either a hybrid turbo upgrade or a full big turbo kit with supporting fuelling, is what takes these cars past four figures.
Drivetrain varies more than the engine does. The F10 M5 and F06/F12/F13 M6 send power through BMW's 7-speed M-DCT dual-clutch gearbox to the rear wheels only, no all-wheel drive on either car. Every other car in this family, the F90 M5, the F91/F92/F93 M8, and all four X5 M and X6 M variants, runs the ZF 8HP torque-converter automatic paired with xDrive all-wheel drive as standard.
Every stage is calibrated by Samuel on the in-house 4WD dyno at the Manchester workshop, built around the car's own logs, and Stage 1 and Stage 2 maps are fully reversible back to the factory file.
Bootmod3 (BM3): Bootmod3 is one of the two platforms Samuel calibrates the S63 on, giving full access to boost, fuelling and timing at every stage, from an off-the-shelf Stage 1 map through to a bespoke big-turbo build, with logging built into the app itself.
MHD: MHD is the other route available for S63 calibration, covering the same ground as Bootmod3 through its own self-flash app. Which one Samuel recommends usually comes down to which hardware and interface you'd rather run, not any difference in the tune itself.
MG Flasher: There's no verified MG Flasher support for the S63 in Samuel's build data, so it isn't currently a route offered on this engine. If that changes, this section will be updated rather than guessed at.
xHP: Where an S63 car runs the ZF 8HP automatic, the F90 M5, the M8, and all four X5 M/X6 M variants, xHP gearbox tuning is a worthwhile companion to the engine remap, sharpening shift response and raising the transmission's torque limits to suit the extra power. It isn't applicable to the F10 M5 or the F06/F12/F13 M6, since both run the older 7-speed M-DCT rather than a ZF transmission.
Scroll through each stage — your Bapro dyno report fills in as we work, from the first health check to the final validated power run.
Calibration and dyno runs are repeated over several passes until the numbers are right.
Full vehicle scan and mechanical health check before any work begins.
Stock power and torque measured on the four-wheel-drive dyno.
Original calibration read from the ECU and safely backed up.
A bespoke map written for your specific vehicle and goals.
Repeated pulls with live data logging to validate and refine the map.
Confirmation run, road test and a before/after dyno printout.
Not sure which stage or method suits your car? Send us a message and we’ll talk it through.