
Open-top pace is the appeal of the JCW Convertible, and underneath the folding roof sits the same higher-output B48/B46 four fitted to the rest of the JCW range, tuned noticeably harder from the factory than the Cooper S it's built alongside. Stage 1 software is the starting point, with a full turbo build available for anyone wanting to take it further.

| Stage | Target | Price |
|---|---|---|
| Stage 1 | 270–290 bhp · 380–420 Nm | £399 · £499 dyno |
| Stage 2 | 290–310 bhp · 440–470 Nm | £399 · £499 dyno |
| Stage 3, Big Turbo / Built Engine | Up to ~380–400+ bhp (larger/hybrid turbo + fuelling) | POA |
The F57 JCW Convertible pairs the range's strongest hatch-based factory tune, 231 bhp and 320 Nm, with a folding soft-top and the extra structural bracing that comes with losing a fixed roof. It shares its B48 turbo four (B46 on US emissions cars) and its stronger internal specification with the 3-door JCW: proper JCW pistons rather than the Cooper S's lighter-duty units, built to handle more cylinder pressure from new. That extra strength is what lets the Convertible carry Stage 2-level output as comfortably as the hardtop JCW does, despite the additional weight the roof mechanism adds over the hatch.
From a standard 231 bhp and 320 Nm, Stage 1 on the Convertible needs no hardware, just a recalibration worth 270–290 bhp and 380–420 Nm for £399 (£499 dyno tuned). Stage 2 adds an intercooler, a sports cat or decat, and an intake, taking output to 290–310 bhp and 440–470 Nm for the same price, with cooler spark plugs recommended given the extra heat this stage puts through the engine. The JCW's stronger factory pistons mean both stages sit comfortably within what the internals can handle, roof down or up. Beyond Stage 2, the ceiling is a turbo build, a larger or hybrid turbo plus supporting fuelling, reaching up to 380–400+ bhp depending on spec, priced on application. Given the Convertible's extra weight over the hatch, the added torque tends to matter as much as the peak figures once you're into Stage 2 and beyond. 99 RON is strongly advised from Stage 2 upward. Every stage is calibrated for your specific car, checked on the in-house dyno, and fully reversible.
Stage 1 on the JCW Convertible is calibration only, no hardware fitted, taking the standard 231 bhp and 320 Nm to 270–290 bhp and 380–420 Nm for £399 (£499 dyno tuned). It's the same underlying map as the hardtop JCW, adjusted for the extra weight the folding roof and its supporting structure carry over the 3-door. Checked on our in-house 4WD dyno, with a full return to standard always available.
290–310 bhp and 440–470 Nm is what Stage 2 brings to the JCW Convertible, once an intercooler, a sports cat or decat, and an intake are fitted, £399 (£499 dyno tuned) either way. The JCW's stronger internals carry this stage comfortably, roof down or up, and cooler spark plugs are worth fitting alongside the hardware. 99 RON is strongly recommended. Verified on the dyno, calibrated for your car, reversible.
A larger or hybrid turbo with supporting fuelling underpins the Convertible's Stage 3 route, reaching up to 380–400+ bhp depending on specification. The JCW's stronger factory pistons mean the top end of that range is reachable without necessarily needing forged internals first, though Samuel confirms exactly what your target needs once he's seen the build. Priced on application throughout.
The B48 is BMW's turbocharged 2.0-litre inline-four, and it's the engine doing the most work across the current line-up: the entry-level 3 and 4 Series, the 330e and 530e plug-in hybrids, every current MINI Cooper S and John Cooper Works, and the Z4 sDrive20i roadster. One block, one turbo architecture, calibrated to a different factory output depending on which car it's dropped into, anywhere from 184 bhp in a 320i up to 306 bhp in the later JCW Clubman and Countryman.
That range of factory outputs from a single physical engine tells you most of what you need to know about where the tuning headroom comes from. BMW builds one block and calibrates it differently for each application, which means the hardware underneath even the lowest-output cars, the 320i and 420i included, is capable of considerably more than the factory software asks of it. The turbo, injectors and internals are shared with cars making 100+ bhp more from the factory; what changes between them is the map, not the metal.
MINI ownership comes with one complication worth knowing early. The Cooper S and John Cooper Works share the same B48/B46 block, but not the same internals: the Cooper S runs lower-compression, lighter-duty pistons than the JCW, so while Stage 1 and Stage 2 are safe on stock internals for both, JCW-level output on a Cooper S needs forged pistons first. We flag this on every Cooper S build regardless of which package is chosen, and 99 RON fuel is strongly recommended on any Stage 2 map across the whole family.
Most cars in this family run BMW's ZF 8HP automatic. Where that's the case, pairing an ECU remap with xHP gearbox tuning sharpens shift points and firms up clutch pressure to suit the extra torque, a genuinely worthwhile addition rather than a nice-to-have upsell.
Bootmod3 (BM3): Bootmod3 is one of the two calibration platforms Samuel writes B48 maps on, covering the full range from Stage 1 through to hybrid and big-turbo Stage 3 builds. It gives full access to the boost, fuelling and timing tables the ECU actually runs, and every map is written specifically for your car rather than loaded from a generic file library.
MHD: MHD is the alternative platform for B48 calibration, doing the same job as Bootmod3 on this engine with full access to the underlying maps. Which one Samuel uses for your car usually comes down to what's already installed, or personal preference, since both give the same depth of control over a bespoke, vehicle-specific tune.
MG Flasher: MG Flasher also supports the B48 platform and is a genuine third option alongside Bootmod3 and MHD, particularly common among owners who've already got hardware or a subscription set up around it. If you're specifically after MG Flasher for your car, mention it when you get in touch and Samuel can confirm the build around it.
xHP: xHP handles gearbox tuning for cars in this family running BMW's ZF 8HP automatic, sharpening shift points and firming up clutch pressure to suit the extra torque from an ECU remap. It's a separate service from the ECU stages priced on each page, worth pairing with any Stage 1 or Stage 2 remap rather than leaving the transmission on its standard calibration.
Scroll through each stage — your Bapro dyno report fills in as we work, from the first health check to the final validated power run.
Calibration and dyno runs are repeated over several passes until the numbers are right.
Full vehicle scan and mechanical health check before any work begins.
Stock power and torque measured on the four-wheel-drive dyno.
Original calibration read from the ECU and safely backed up.
A bespoke map written for your specific vehicle and goals.
Repeated pulls with live data logging to validate and refine the map.
Confirmation run, road test and a before/after dyno printout.
Not sure which stage or method suits your car? Send us a message and we’ll talk it through.