Buy now, pay later with Klarna — available on all tuning packages
S55Saloons & Coupés

M3 F80

The F80 was the first M3 BMW ever turbocharged, and the S55 underneath it is one of the most tunable engines the company has built. Samuel calibrates the full range on it, from a no-hardware Stage 1 remap to a fully bespoke big-turbo build, all mapped in-house on our 4WD dyno in Manchester.

350400450500550600 Power · bhp Stock · 425 bhp Stage 3 · 600+ bhp Stage 2 · 560 bhp Stage 1 · 520 bhp 345×1000 rpm
M3 F80
Stock425 bhp · 550 Nm
Platform ceiling1200+ bhp
4WD in-house dyno100+ BMWs tunedKlarna available
  1. 1Stage
  2. 2Options
  3. 3Book
Choose your stage

Dyno tuned: we validate and refine your map on our in-house 4WD dyno. Stage 3 is dyno only.

Add options — all optional, pick as many as you like
Tuning Platform
Map Options
Fuel
Gearbox
ECU
Your details

This is the full price for the package as configured. We’ll confirm the exact spec for your car before any work starts — if anything changes, we’ll adjust the balance either way.

Card, Apple Pay or Klarna — secure Stripe checkout, right here. Your slot is confirmed the moment payment completes.

Estimated total£550
Specs & Stages

M3 F80 at a Glance

Engine
S55
Body styles
F80 Saloon
Chassis codes
F80
Production
2014–2018
Drivetrain
Rear-wheel drive
Gearbox
7-speed DCT or 6-speed manual
Stock output
425 bhp · 550 Nm
Tuning ceiling
~1200 bhp on the right hardware
StageTargetPrice
Stage 1520 bhp · 700 Nm£450 · £550 dyno
Stage 2560 bhp · 750 Nm£450 · £550 dyno
Stage 3, Hybrid Turbo600-1200 bhp depending on spec£1,200 dyno only
Stage 3, Big Turbo Kit600-1200 bhp depending on specPOA
  • Stage 1No hardware required
  • Stage 2Downpipes + midpipe + intakes
  • Stage 3, Hybrid TurboDownpipes + midpipe + intakes + hybrid turbo
  • Stage 3, Big Turbo KitDownpipes + midpipe + intakes + full-frame turbo + port injection or HPFP lift kit (Dorsche)
The Car

The M3 on the S55

Built from 2014 to 2018, the F80 M3 was the first M3 to arrive with forced induction, replacing the naturally aspirated S65 V8 of the previous generation with the twin-scroll, twin-turbo S55 straight-six. It's saloon-only, RWD only (there's no xDrive option on this platform), and sends 425 bhp and 550 Nm through either a 7-speed M-DCT or a 6-speed manual. Enthusiasts tend to call the F80 the analogue M3: no electric power steering assistance to filter feedback, no torque vectoring beyond the mechanical limited-slip diff, and a chassis that BMW tuned to respond directly to whatever the engine is doing. That directness is exactly why it takes so well to a remap.

Tuning

Tuning the M3

Stock, the F80 M3 is running a comparatively conservative 425 bhp / 550 Nm considering what the S55 block, turbos and internals are actually capable of, which is why Stage 1 delivers such a noticeable jump: a pure software recalibration, no hardware required, taking the car to 520 bhp / 700 Nm, a 95 bhp and 150 Nm gain over standard. Stage 2 adds downpipes, a sports midpipe and intakes, clearing the exhaust and induction restrictions the factory turbos are working against, and lifts that further to 560 bhp / 750 Nm, with the manual and M-DCT cars responding essentially identically since the changes happen upstream of the gearbox.

Past Stage 2, the stock turbos become the limiting factor rather than the bottom end beneath them. Samuel offers a hybrid turbo build, reworked stock-frame turbos with the Stage 2 hardware already in place, or a full big turbo kit with port injection or an HPFP lift kit such as Dorsche, either route capable of pushing past 1200 bhp depending on the rest of the build. Every stage is calibrated on our 4WD dyno rather than loaded from a stock file library, and every one, Stage 1 through Stage 3, is fully reversible.

Stage By Stage

Stage by stage

Stage 1

Stage 1 takes the F80 M3 from 425 bhp / 550 Nm to 520 bhp / 700 Nm, a 95 bhp and 150 Nm gain, purely through recalibrating boost, ignition and fuelling around the stock turbos: no hardware changes at all. On a chassis as mechanically direct as the F80's, that gain doesn't get filtered through electric steering assistance or software torque vectoring the way it might on a newer M car, it just shows up as more shove exactly where the driver's already asking for it. It works identically on the manual and the M-DCT, since the recalibration happens entirely within the engine management rather than the gearbox, and it's a same-day, fully reversible dyno appointment.

Stage 2

Stage 2 fits downpipes, a sports midpipe and intakes, and Samuel recalibrates around that hardware to reach 560 bhp / 750 Nm. The F80's factory exhaust is one of the more restrictive parts of the standard car, so this stage tends to bring a bigger jump in how the engine breathes at the top end than the raw numbers alone suggest, along with a noticeably freer-revving character and a sharper exhaust note. It's still running on the stock turbos, so daily usability and reliability don't change from Stage 1, and for a manual-gearbox F80 in particular, the extra midrange makes rev-matched downshifts noticeably more satisfying.

Stage 3, Hybrid Turbo

Stage 3 Hybrid Turbo fits reworked stock-frame turbos alongside the Stage 2 hardware, with output ranging from 600 bhp up to 1200+ bhp depending on the rest of the build. On a car as mechanically direct as the F80, more power without more electronic intervention means the chassis, tyres and brakes need to genuinely keep pace, so this is where we start talking to owners about supporting hardware beyond the engine if the car's going to see regular track use. It's a popular stopping point for F80 owners who want a proper step up in output while keeping the car's analogue character intact.

Stage 3, Big Turbo Kit

The Big Turbo Kit route fits a full-frame turbo, supported by port injection or an HPFP lift kit such as Dorsche, priced POA since every build is specified around the customer's goals for the car. On the F80, we see this route chosen by owners building a dedicated track or drag car around the S55's genuine strength, its standard bottom end holds more than most stock turbo setups can feed it, so the big-turbo route is really about unlocking what was already there. Output runs from 600 bhp up to 1200+ bhp depending on spec, calibrated from scratch on our 4WD dyno once the hardware's fitted.

FAQs

Common Questions

How much power does a Stage 1 M3 make?
Stage 1 takes the F80 M3 from a stock 425 bhp / 550 Nm to 520 bhp / 700 Nm, a 95 bhp and 150 Nm gain over standard, done entirely through software with no hardware changes. It's the same figure the M2 Competition and M4 CS/M3 CS eventually reach too, since the whole S55 range shares one Stage 1 target, but on the standard F80 it represents one of the larger proportional jumps in the family. Booked as a single dyno session, fully reversible.
Which M3 variants and body shapes does this cover?
This covers the standard F80 M3, built 2014 to 2018, saloon-only, RWD only, running either the 7-speed M-DCT or the 6-speed manual. It doesn't cover the M3 CS, which carries a higher factory calibration (460 / 600) and sits on its own page, or the coupe-bodied M4, which shares the F80's 425 / 550 stock output but is a genuinely different chassis under a different body code (F82). If your V5 shows F80, this is the right page.
What hardware do I need for Stage 2 on the M3?
Downpipes, a sports midpipe and a set of intakes, fitted ahead of your dyno session, the standard Stage 2 requirement across every S55 car. On the F80 these three changes address what's genuinely one of the more restrictive stock exhaust and intake setups in the range, which is part of why Stage 2 tends to feel like a bigger step here than the bhp figure alone implies. Once fitted, Samuel recalibrates around the hardware to land at 560 bhp / 750 Nm.
What's the tuning ceiling on the M3?
The F80's ceiling, like every S55 car, is 1200+ bhp via the Big Turbo Kit route. Given how much of the F80's appeal is its mechanical directness rather than outright numbers, plenty of owners we see are happiest at Stage 2 or Stage 3 Hybrid Turbo, where the extra output stays proportionate to a chassis with no electric assistance filtering the experience. The Big Turbo Kit is there for the ones building specifically around a bigger number.
How is my tune delivered, and is it reversible?
Every F80 tune is calibrated in person by Samuel, on our 4WD dyno in Manchester, on Bootmod3 or MHD depending on which platform suits your setup. Your car's own factory file is read and archived before any changes are made, so it can go back to bone stock at any point, whether that's ahead of a dealer visit or simply to try a different stage. Nothing about the process involves a generic off-the-shelf map.
Will tuning my M3 affect the warranty?
A live tune sits outside BMW's factory warranty terms, and most F80s we see now are past their original manufacturer cover given the car's age, running instead on used-car or extended warranties where tuning policy depends on the provider. The reversibility of every stage means the car can be put back to its exact factory file if a warranty claim needs it, with no physical evidence the ECU was ever touched.
Engine & Platform

The S55 engine

The S55 is BMW M's 3.0-litre twin-scroll, twin-turbocharged straight-six, built from 2014 to 2020 and fitted to every M2 Competition, F80 M3 and F82/F83 M4 that left the factory, plus the run-out M3 CS, M4 CS and water-injected M4 GTS. It replaced the naturally aspirated S65 V8 of the previous-generation M3, and it was BMW M's first fully boosted engine for a 3 Series or 4 Series M car: a closed-deck aluminium block, forged crank and rods, and two mono-scroll turbochargers, one per cylinder bank of three, feeding a single MEVD17 DME. Factory outputs across the range span 410 bhp in the M2 Competition up to 493 bhp in the M4 GTS, but every variant is built on the identical block, the identical turbo hardware and the identical engine management. Only the calibration and, on the GTS, a factory water/methanol injection system, separate one car's stock output from another's, which is why the tuning ceiling is the same regardless of which S55 car turns up on Samuel's 4WD dyno.

Stage 1 is a software-only recalibration, no hardware changes, and takes the whole range to 520 bhp / 700 Nm. Stage 2 adds downpipes, a sports midpipe and induction upgrades and moves that to 560 bhp / 750 Nm, freeing up the exhaust and intake restrictions the stock turbos are working against. Beyond that, the S55's factory turbos become the limiting factor rather than the block underneath them, which still has plenty of headroom: Stage 3 splits into a hybrid turbo build, reworked stock-frame turbos with larger internals, or a full big turbo kit with port injection or an HPFP lift kit such as Dorsche, either route capable of 600 to 1200+ bhp depending on the rest of the build. Every stage is calibrated in-house on Samuel's 4WD dyno rather than pulled from a generic map file.

Platform compatibility

Bootmod3 (BM3): Samuel runs Bootmod3 on the S55 as the primary platform for Stage 1 and Stage 2 work, with on-device map switching between stock, Stage 1, Stage 2, valet and any custom Stage 3 base maps, plus built-in datalogging. It's the platform used for the majority of Stage 1/Stage 2 S55 cars through the Manchester workshop.

MHD: MHD is available as an alternative flashing platform for the S55, and Samuel calibrates bespoke maps for it in exactly the same way as Bootmod3, on the same 4WD dyno session. Some customers prefer its app-based flashing and logging; either platform gets the same hand-built calibration underneath.

MG Flasher: MG Flasher doesn't currently support the S55 and isn't a route offered on this engine. If that changes, this page will be updated; until then, Bootmod3 and MHD are the two flashing platforms available for S55 tuning here.

The Process

How We Tune Your M3 F80

Scroll through each stage — your Bapro dyno report fills in as we work, from the first health check to the final validated power run.

117Dyno Report M3 F80 · S55
Health CheckChecking…
ECU Backup—
Baseline—
Map—
Peak Result—
Power (bhp)—
2kRPM7k
Pending

Calibration and dyno runs are repeated over several passes until the numbers are right.

01

Health Check & Diagnostics

Full vehicle scan and mechanical health check before any work begins.

02

Baseline Power Run

Stock power and torque measured on the four-wheel-drive dyno.

03

ECU Read & Backup

Original calibration read from the ECU and safely backed up.

04

Custom Calibration

Repeated

A bespoke map written for your specific vehicle and goals.

05

Dyno Runs & Live Logging

Repeated

Repeated pulls with live data logging to validate and refine the map.

06

Final Run, Road Test & Printout

Confirmation run, road test and a before/after dyno printout.

More Packages

Related Builds

Get In Touch

Questions Before You Book?

Not sure which stage or method suits your car? Send us a message and we’ll talk it through.