
BMW dropped the S58 into its smallest M chassis for the G87 M2, and the result is the most tuneable small coupe currently on sale. Samuel takes it from a straightforward Stage 1 map through to full big-turbo builds on the same dyno, so whatever level you're building toward, the calibration is done specifically for your car.

| Stage | Target | Price |
|---|---|---|
| Stage 1 | 650 bhp · 800 Nm | £600 · £750 dyno |
| Stage 2 | 720 bhp · 900 Nm | £600 · £750 dyno |
| Stage 3, Hybrid Turbo | 800-1500 bhp depending on spec | £1,400 dyno only |
| Stage 3, Big Turbo Kit | 800-1500 bhp depending on spec | POA |
The G87 M2 (2023-present) is the first M2 to use the S58, replacing the S55 that powered the outgoing M2 Competition and M2 CS. It's the smallest body BMW currently builds around this engine, and that combination has made it one of the most-tuned M cars on UK roads within a couple of years of launch. Stock output is 460 bhp and 550 Nm, sent to the rear wheels only, there's no xDrive option on this generation of M2. Buyers choose between the ZF 8HP automatic and a 6-speed manual, and both respond to tuning in the same way since the gains come from the engine side, not the transmission. Light weight and a compact wheelbase mean the extra power shows up fast.
Stock, the G87 M2's S58 is deliberately reined in compared with what the hardware can handle, BMW leaves clear margin in the factory calibration for a reason. Stage 1 is where most owners start: a recalibration of boost, fuelling and ignition timing that lifts the car to 650 bhp and 800 Nm using nothing but the factory turbos, exhaust and intercooler, and it's the package that best shows off how much BMW left on the table. Stage 2 raises the ceiling to 720 bhp and 900 Nm, but it needs downpipes, a midpipe and upgraded intakes fitted first to support the extra airflow, since the stock exhaust and filters become the limiting factor before the turbos do. Beyond that, the M2 moves onto proper hardware territory: a Hybrid Turbo build reworks the factory turbochargers' internals for a step up in flow, while a Big Turbo Kit replaces them outright, and both routes can be specified with port injection and a flex-fuel kit for E85 running. Realistic output at that point runs from 800 bhp up to the platform's 1500+ bhp ceiling, depending on exactly how the car is specified. Every stage is written on our in-house 4WD dyno, and because the M2 needs its ECU physically unlocked before any of this can happen, the whole build happens at the Manchester workshop rather than over email.
Stage 1 on the M2 is a pure software recalibration: boost targets, fuelling and ignition timing are rewritten around the factory hardware, with no parts to fit and nothing to remove for a service. Output moves from 460 bhp / 550 Nm to 650 bhp / 800 Nm, a jump of nearly 200 bhp that the standard turbos, exhaust and cooling are able to support safely once the map is right. Because the G87 is RWD only, that extra torque goes straight to the rear axle, so the car feels noticeably more urgent from low revs without changing anything about how it looks or sounds at idle. Most Stage 1 M2s are booked in, dyno-tuned and driven away the same day.
Stage 2 asks more of the supporting hardware. Downpipes, a midpipe and upgraded intakes go on before Samuel remaps for it, because the factory exhaust and filters start choking airflow before the standard turbos reach their limit. With that hardware fitted, the M2 is calibrated to 720 bhp and 900 Nm, a meaningful step past Stage 1 and close to what the factory turbochargers can be pushed to without swapping them. It's the natural stopping point for owners who want a genuinely quick M2 for road and occasional track use without committing to turbo hardware, and it's still fully road-legal, fully reversible on the software side, and built around parts we can source and fit as part of the same visit.
Stage 3 Hybrid Turbo takes the factory turbochargers apart and rebuilds them with larger compressor and turbine wheels, keeping the factory housings and mounting points but shifting the flow ceiling well past what the stock units can do. Combined with downpipes, midpipe and intakes, and an optional flex-fuel kit for E85, the M2 can be calibrated anywhere from 800 bhp up toward the platform's ceiling depending on the exact spec chosen, running gear, fuelling and how hard you want to run it. It's the point where the M2 stops being a quick coupe and starts being a genuine track weapon, and every hybrid build is mapped specifically around the turbo spec fitted, not a generic hybrid-turbo map.
Big Turbo Kit is the ceiling for the G87 M2: the factory turbochargers come off entirely and are replaced with a larger aftermarket kit sized for serious power, paired with port injection to keep fuelling under control at those loads and a flex-fuel kit if E85 is part of the plan. Realistic output again runs from 800 bhp up past 1500 bhp, gated by how far the rest of the build (fuel system, cooling, drivetrain) has been taken rather than by the turbo kit itself. This is a bespoke, priced-on-application build, and Samuel works through the full spec with you before anything is ordered, since a Big Turbo M2 is a project car, not a weekend upgrade.
BMW's S58 is the twin-scroll, twin-turbocharged 3.0-litre straight-six that underpins every current M3, M4, M2, X3 M and X4 M sold in the UK. It shares its basic architecture with the S55 it replaced, but with a stronger crankcase, higher-flowing turbochargers and a dry-sump oiling system derived from the M4 GT3 racing programme, all of which gives Samuel considerably more to work with once the ECU is open.
That last part is what makes this engine different to tune than most others in this catalogue. BMW's ECU protection on the S58 is genuinely tight, and there's no way to open it up remotely. Every car on this platform has to come to the workshop in Manchester and go on the in-house 4WD dyno in person, there's no email-a-file, drive-away service on the S58. We unlock these ECUs ourselves, in-house, using AutoTuner and FEMTO rather than posting the ECU away to a third party. The only exceptions anywhere in the range are the 2026 Euro 7 S58 cars and the 2026 B58 Gen 3, which are the one case where an ECU still goes off-site, and that runs to a 3-4 day turnaround.
Once the ECU is open, the tuning logic is the same across the whole range: Stage 1 raises boost and fuelling within what the stock hardware can already take, Stage 2 adds supporting parts (downpipes, midpipe, intakes) to remove the next bottleneck, and Stage 3 moves onto hybrid or big-turbo hardware for anything beyond that. Because the unlock and every tune are done at ECU level rather than through a separate piggyback box, the software is fully reversible: we can put any S58 back to its original factory calibration whenever it's needed, no trace left behind.
Bootmod3 (BM3): Bootmod3 is one of our most-used platforms on the S58, giving full access to boost, fuelling and timing maps at every stage, with app-based logging and switchable map slots that make it easy to move between a road map and a track map. Fully supported on every car in this family.
MHD: MHD is the other mainstream route we run on the S58, covering the same ground as Bootmod3 through its own app, flashing hardware and map-switching setup. Which platform Samuel recommends usually comes down to personal preference or what else you're running, rather than any real difference in where the S58 can be pushed on either.
MG Flasher: MG Flasher is a genuine third option on the S58, not a fallback: every package on this page is hand-built on MG Flasher exactly as it is on Bootmod3 or MHD, Stage 1 through big-turbo builds. If you're already set up on MG Flasher hardware, there's no compromise in bringing your S58 here on it.
xHP: Where an S58 car runs the ZF 8HP automatic, xHP handles the gearbox side: shift speed, launch control behaviour and shift firmness, alongside the engine tune rather than instead of it. It's not applicable to the manual-gearbox versions of the M2 and M3, since there's no ZF transmission for it to work with on those cars.
Scroll through each stage — your Bapro dyno report fills in as we work, from the first health check to the final validated power run.
Calibration and dyno runs are repeated over several passes until the numbers are right.
Full vehicle scan and mechanical health check before any work begins.
Stock power and torque measured on the four-wheel-drive dyno.
Original calibration read from the ECU and safely backed up.
A bespoke map written for your specific vehicle and goals.
Repeated pulls with live data logging to validate and refine the map.
Confirmation run, road test and a before/after dyno printout.
Not sure which stage or method suits your car? Send us a message and we’ll talk it through.